_____________,------------------,,,__________ /________ / ____________ // ________/ ____,-------------,___ #### // ____/ ____/_/ ____/ / // \ / // ______ ____/jp ### / _________//___/ \________/ \/ / ____/_// / ## ## # ####`----------''' ######## `-----' ## \_____/ __________ \ ## ## # ,------------------------------------, ##### `-----''' ###### `----' ## ## # | tHE zERO nETWORk sETUP gUIDE (2.1) | ####################### #### ### ## # `------------------------------------' --------- --- -- - >> contents --------- --- -- - <0> changes? <1> setting up your mail tosser (general info/gecho/fastecho) <2>setting up your mailer (general info/irex email/irex ftp/fido2int email) <3> setting up your bbs software (mystic/iniquity/renegade/telegard/etc) <4> getting it all fine tuned (batch files for gecho and bbs softwares) <5> getting it even more fine tuned (automation with mystic, gecho, irex, f2i) <6> misc info. <7> the end/contact information! --------- --- -- - >> section 0: latest changes to the guide: --------- --- -- - ph noticed a problem in my guide... i had stated in the gecho and fe setup that jam systems should have the same thing for the path name for every base. this is true for bbses, but not true for tossers. the path name should specify the directory AND the filename for each jam base. ie: C:\netmail\zeronet\0n-test C:\netmail\zeronet\0n-info a *.msg system will require just a directory there... all the files are stored in their own directories in a *.msg system. C:\netmail\zeronet\0n-test\ C:\netmail\zeronet\0n-info\ hopefully that clears things up... --------- --- -- - >> section 1: setting up your mail tosser (general info/gecho/fastecho) --------- --- -- - - preface: a mail tosser does just that, it tosses your mail from your bbs to your mailer program, and vice versa... it's the middle man of echo mailing, and generally a good place to start setting up... ok, you'll notice this section is specific to setting up gecho, but most mail tossers are basically the same, which look different, behave slightly different and maybe call a few things by different names. this section should be enough information to setup most tossers... i've also included a setup guide for the other of the most popular tossers, fastecho. - setting up gecho v1.20pro we'll be using gecho as an example because it is the tosser i am most familiar and it's fairly common. if you are not using this version of gecho, the setup should be almost identical, a few things may be in different places or not in your copy at all. first, you need to download and install gecho, i put my copy in D:\gecho, but doesn't matter that much where you put it. to keep things simple i would recommend installing it in it's own directory. once you've go it all unpacked and ready to roll you need to run GSETUP.EXE, which is gecho's setup program... the first time you run it it will ask you if you want to create a configuration file... you should choose yes, if it asks for a password and you don't have one, type in "I AGREE" which will unlock the demo version. it is important to know that this program has MANY options, things i never blank or skip you can consdier either options we do not need or preferences that are not important to the setup of this program... welcome to the main menu... ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±ÕÍÍÍÍÍÍÍÍÍ Main ¸±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ System data ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Miscellaneous ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Area manager ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Group manager ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Node manager ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Pack manager ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Export data ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Information ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ Exit to DOS ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Miscellaneous system information pretty isn't it? especially in ascii, ok... anyways, you wanna go to system data first of all... then go to "Network Addresses" ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Addresses ¸± ±³ Main 911:XXXX/X 0 Aka 16 0 ³± ±³ Aka 1 0 Aka 17 0 ³± ±³ Aka 2 0 Aka 18 0 ³± ±³ Aka 3 0 Aka 19 0 ³± ±³ Aka 4 0 Aka 20 0 ³± ±³ Aka 5 0 Aka 21 0 ³± ±³ Aka 6 0 Aka 22 0 ³± ±³ Aka 7 0 Aka 23 0 ³± ±³ Aka 8 0 Aka 24 0 ³± ±³ Aka 9 0 Aka 25 0 ³± ±³ Aka 10 0 Aka 26 0 ³± ±³ Aka 11 0 Aka 27 0 ³± ±³ Aka 12 0 Aka 28 0 ³± ±³ Aka 13 0 Aka 29 0 ³± ±³ Aka 14 0 Aka 30 0 ³± ±³ Aka 15 0 Aka 31 0 ³± ±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Network address in :/[.point] format you want to enter your main address as the one we assigned you, if you havn't been assigned one yet just put 50:50/50 for now, if you have more than one net you probably shouldn't bother reading this because hopefully you know what you're doing, but you'd want to use one of the AKA's for what we assign you... next go to your "System Users" section and define yourself as a user... ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸±±±±±±±±±±±±±±±± ±±±±±±±±±±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 ¸±±±±±±±±±±± ±±±±±±±±±±³ ³±±±±±±±±±±± ±±±±±±±±±±³ SysOp name your name ³±±±±±±±±±±± ±±±±±±±±±±³ Personal mail area 0 ³±±±±±±±±±±± ±±±±±±±±±±³ Use AKA area No ³±±±±±±±±±±± ±±±±±±±±±±³ Netmail area 0 ³±±±±±±±±±±± ±±±±±±±±±±³ Access password No ³±±±±±±±±±±± ±±±±±±±±±±³ ³±±±±±±±±±±± ±±±±±±±±±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±±±±±±±±±± ±±±±±±±±±±±±±±±±³ 9 0 ³±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±³ 10 0 ³±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±³ ³±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SysOp name for now, don't worry about any of the settings unless you know what you're doing... Next go to "Pathnames" ... obviously this section allows you to specify various paths that your tosser and mailer use... ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Pathnames ¸±±±± ±±±±³ ³±±±± ±±±±³ Netmail C:\NETMAIL\ ³±±±± ±±±±³ Inbound mail D:\GECHO\INBOUND\ ³±±±± ±±±±³ Inbound PKTs D:\GECHO\INPKTS\ ³±±±± ±±±±³ Outbound PKTs D:\GECHO\OUTPKTS\ ³±±±± ±±±±³ Outbound mail D:\GECHO\OUTBOUND\ ³±±±± ±±±±³ Unchecked mail D:\GECHO\SECURE\ ³±±±± ±±±±³ Hudson base ³±±±± ±±±±³ JAM base ³±±±± ±±±±³ User base ³±±±± ±±±±³ Wildcat! home ³±±±± ±±±±³ Swapping D:\GECHO\ ³±±±± ±±±±³ Semaphore D:\GECHO\ ³±±±± ±±±±³ ³±±±± ±±±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Where incoming and outgoing netmail messages are stored this is a simple setup i use with fido2int, the blank lines are meant to be blank, and "c:\netmail" is kind of an unusual directory for netmail, C/D:\gecho\netmail is more typical... if you're using a frontend mailer like frontdoor or intermail these might be directories you already setup for them for instance your netmail directory might be "C:\fd\netmail"... now go back to your System Data and go to Filenames, here's a shot of mine... ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸±±±±±±±±±±±±±±±±±±±±±±±±±± ±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Filenames ¸± ±³ ³± ±³ GEcho log D:\GECHO\GECHO.LOG ³± ±³ Mgr log D:\GECHO\AREAMGR.LOG ³± ±³ MBUTIL log D:\GECHO\MBUTIL.LOG ³± ±³ Areas file ³± ±³ Echo toss ³± ±³ DOS4GW.EXE ³± ±³ ³± ±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±ÔÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The name and location of GEcho's log file now go back to your System Data and go to External Utilies, you need to select pkzip here, since that's what we use on this net, and most others. here's a shot of mine... ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ GEcho SETUP 1.20/Pro ù Professional version 911:1423/0 ³ ³ Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ External utilities ¸±±± ±±³ ³±±± ±±³ ARC PKPAK.EXE -a ARCE.COM ³±±± ±±³ ARJ ARJ.EXE a -e -m1 -s -t0 -y ARJ.EXE e -c -ha -y ³±±± ±±³ LZH LHA.EXE a /mt LHA.EXE e /cm ³±±± ±±³ PAK PAK.EXE A /L /ST PAK.EXE E /WA ³±±± ±±³ ZIP þPKZIP.EXE -a -ex -o PKUNZIP.EXE -o -ed ³±±± ±±³ ZOO ZOO.EXE a: ZOO.EXE eO ³±±± ±±³ SQZ SQZ.EXE a /p3q0z3 SQZ.EXE e /o1 ³±±± ±±³ UC2 UC.EXE A -BFTT UC.EXE E -F ³±±± ±±³ RAR RAR.EXE a -ep -m4 -o+ -s -y RAR.EXE e -o+ -y ³±±± ±±³ 10 ³±±± ±±³ GUS ³±±± ±±³ PKT ³±±± ±±³ ³±±± ±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Used to create/update and unpack compressed mail files. F10-Default compression now let's go ahead and jump all the way back to the main menu, and then in to "Node Manager." you want to add a new node, which will be the information for our hub... the only things you should be really concerned with are the first three entries, everything else should be default like shown in the screen shot, also you need to make sure read/write groups is set to the group you added for zeronet! oh, there is NO packet password!!@!#$# Õ View 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Node manager ¸ ³ ³ ³ Node address 911:1423/0 ³ ³ SysOp name jack phlash ³ ³ Route via 911:1423/0 ³ ³ Packet password ³ ³ ÀÄCheck password n/a ³ ³ AreaMgr password ³ ³ Read/write groups 1 ³ ³ Read groups 1 ³ ³ AreaMgr msg status Direct ³ ³ Mail archive status Direct ³ ³ Compress extension 0-9 ³ ³ Compression method PKZIP.EXE -a -ex -o ³ ³ Days to keep mail 0 ³ ³ Options Allow rescan Yes Remote maintenance No ³ ³ Forward requests No Send notify list Yes ³ ³ ARCmail compatibility No Daily archives No ³ ³ Pack netmail Yes Forward packets Yes ³ ³ Uplink settings No ³ ³ ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter-Edit Ins-Add Del-Delete F3-Copy F4-Find F5-Browse Esc-Exit ok, we're ready to get real dirty... go ahead and jump all the way back back to your main menu, and goto "Group Manager" you probably need to put your mail in a seperate directory for each area if you're using *.MSG format, (most people do) so you want to put the subdirectory to make it easier... think as the group as a template for your areas... the name mask says "0N-" because all the groups are called "0N-BLAH" so it makes it a little easier to work with. origin and seen by akas should be your address, and connections should be mine or whatever your hub is... Õ View 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Group manager ¸ ³ ³ ³ Name mask 0N- ³ ³ Group name the zero network ³ ³ Area type Echomail ³ ³ Format *.MSG ³ ³ Path C:\NETMAIL\ZERO\ZN- ³ ³ Group 1 ³ ³ Options Security Yes Disconnected No Notified No Check dupes Yes ³ ³ Check SB No Import SB No Hide SB No Tiny SB No ³ ³ Mandatory No No %PAUSE No Read-Only No Reply links Yes ³ ³ Allow Pvt No Del future No Hidden No Visible No ³ ³ Purge info Days old 0 Days rcvd 0 Max msgs 0 ³ ³ Origin line ³ ³ Origin AKA 911:XXXX/X (yours) ³ ³ Seen-By 911:XXXX/X (yours) ³ ³ Connections 911:1423/0 ³ ³ ³ ³ Areas file ³ ³ ÀÄFormat Random ³ ³ Always No ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter-Edit Ins-Add Del-Delete F2-Global F3-Copy F5-Browse if you use a bbs software with a different format, like, say... jam bases, you can skip a whole part of setting up your bbs and just simply have your bbs software share the files... see section 3 for more info. jam uses a specific filename for each file it stores messages in rather than a generic one like *.MSG format, meaning you don't have to specify and directory for each area, they can all reside in (in this example) c:\netmail\zero\ Õ View 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Group manager ¸ ³ ³ ³ Name mask 0N- ³ ³ Group name the zero network ³ ³ Area type Echomail ³ ³ Format JAM ³ ³ Path C:\NETMAIL\ZERO\ ³ ³ Group 1 ³ ³ Options Security Yes Disconnected No Notified No Check dupes Yes ³ ³ Check SB No Import SB No Hide SB No Tiny SB No ³ ³ Mandatory No No %PAUSE No Read-Only No Reply links Yes ³ ³ Allow Pvt No Del future No Hidden No Visible No ³ ³ Purge info Days old 0 Days rcvd 0 Max msgs 0 ³ ³ Origin line ³ ³ Origin AKA 911:XXXX/X (yours) ³ ³ Seen-By 911:XXXX/X (yours) ³ ³ Connections 911:1423/0 ³ ³ ³ ³ Areas file ³ ³ ÀÄFormat Random ³ ³ Always No ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter-Edit Ins-Add Del-Delete F2-Global F3-Copy F5-Browse ok, now for the final, and fairly exhausting step of setting up the areas for the network. go to the main menu and go to "Area Manager"... now go get yourself some caffine or smelling salts or something so you can stay awake... ok? ok... choose insert and choose the group we created earlier for zeronet... now this loads all the defaults for the group, we just need to specify area specific settings... here's an example for setting up 0N-TEST on a *.MSG system... the only things you should need to alter usually are the area name and base names for each area. Õ View 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Area manager ¸ ³ ³ ³ Area name 0N-TEST ³ ³ Comment ³ ³ Area type Echomail ³ ³ Format *.MSG ³ ³ Path name C:\NETMAIL\ZERO\0N-TEST\ ³ ³ Group 1 - the zero network ³ ³ Options Security Yes Disconnected No Notified No Check dupes Yes ³ ³ Check SB No Import SB No Hide SB No Tiny SB No ³ ³ Mandatory No No %PAUSE No Read-Only No Reply links Yes ³ ³ Allow Pvt No Del future No Hidden No Visible No ³ ³ Purge info Days old 0 Days rcvd 0 Max msgs 0 ³ ³ Origin line ³ ³ Origin AKA 911:XXXX/X ³ ³ Seen-By 911:XXXX/X ³ ³ Connections 911:1423/0 ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter-Edit Ins-Add Del-Delete F2-Global F3-Copy F4-Find F5-Browse simple enough eh? here's one for setting up 0N-TEST on a JAM system... all you need to change is the name of the area and the filename of the area. remember, you're specifying the filename, as opposed to in the .msg setup where you're specifying the directory the files will be stored. Õ View 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Area manager ¸ ³ ³ ³ Area name 0N-TEST ³ ³ Comment ³ ³ Area type Echomail ³ ³ Format JAM ³ ³ Base name C:\NETMAIL\ZERO\0N-TEST ³ ³ Group 1 - the zero network ³ ³ Options Security Yes Disconnected No Notified No Check dupes Yes ³ ³ Check SB No Import SB No Hide SB No Tiny SB No ³ ³ Mandatory No No %PAUSE No Read-Only No Reply links Yes ³ ³ Allow Pvt No Del future No Hidden No Visible No ³ ³ Purge info Days old 0 Days rcvd 0 Max msgs 0 ³ ³ Origin line ³ ³ Origin AKA 911:XXXX/X ³ ³ Seen-By 911:XXXX/X ³ ³ Connections 911:1423/0 ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter-Edit Ins-Add Del-Delete F2-Global F3-Copy F4-Find F5-Browse cool? ok, now add the rest... any spelling mistakes will make everything screw up, so pay attention when typing them in... ok, that's it for your mail tosser... not at all hard, ignore anything we didn't cover here unless you're using an advanced setup for some reason, oh yeah, if your bbs add tag lines your will want to specify them in gecho, many of the settings we didn't play with are simply preferences, and can adjust yourself... - setting up fastecho v1.46 the second most popular tosser is probably fastecho, which probably an equal or greater amount of people use. first, you need to download and install fastecho, for this example my copy will go in c:\fe but doesn't matter that much where you put it. to keep things simple i would recommend installing it in it's own directory. once you've go it all unpacked and ready to roll you need to run FESETUP.EXE, which is fe's setup program... the first time you run it it will complain about not finding the configuration file. you can hit space to create a new one... it will show you a copyright info screen providing you haven't cracked it, or actually paid for it. it is important to know that this program has MANY options, things i never blank or skip you can consdier either options we do not need or preferences that are not important to the setup of this program... welcome to the main menu... FESetup System Data Export Import F1 Help °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°° FastEcho; Setup 1.46; Unregistered Evaluation Copy °°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°° Copyright 1991-97 by Software Technik Burchhardt. All rights reserved. °°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°° Running under Windows 4.10 °°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° gecho looks better ;) anyways, go to "system" first of all... then go to "network addresses" FESetup System Data Export Import F1 Help °°°°°°°°°°°°°ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Network addresses ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Network addresses ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»° °º Main 911:911/0 Aka 16 º° °º Aka 1 Aka 17 º° °º Aka 2 Aka 18 º° °º Aka 3 Aka 19 º° °º Aka 4 Aka 20 º° °º Aka 5 Aka 21 º° °º Aka 6 Aka 22 º° °º Aka 7 Aka 23 º° °º Aka 8 Aka 24 º° °º Aka 9 Aka 25 º° °º Aka 10 Aka 26 º° °º Aka 11 Aka 27 º° °º Aka 12 Aka 28 º° °º Aka 13 Aka 29 º° °º Aka 14 Aka 30 º° °º Aka 15 Aka 31 º° °ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ° °°°°°°°°°°°°°°°°°°°°°°°°°° Running under Windows 4.10 °°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Primary network address you want to enter your main address as the one we assigned you, if you haven't been assigned one yet just put 50:50/50 for now, if you have more than one net you probably shouldn't bother reading this because hopefully you know what you're doing, but you'd want to use one of the AKA's for what we assign you... next go to your "user names" section and define yourself as a user... FESetup System Data Export Import F1 Help °°°°°°°°°°°°°ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Network addresses ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ User names ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Miscellaneous ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ PathÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Users ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Fileº Name º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ ParaÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Advaº 1 your name here, slacker º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ ARCmº 2 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ FEUTº 3 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Compº 4 º Copy °°°°°°°°°°°°°° °°°°°°°°°°°°°³ Decoº 5 º°°°°°°°°°°°°°°°°°°°° °°°° Copyrigh³ Exteº 6 ºights reserved. °°°° °°°°°°°°°°°°°³ Grouº 7 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Origº 8 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°ÀÄÄÄÄĺ 9 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º 10 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º 11 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°° Running under Windows 4.10 °°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Press to save or to abort editing... Next go to "pathnames" ... obviously this section allows you to specify various paths that your tosser and mailer use... FESetup System Data Export Import F1 Help °°°°°°°°°°°°°ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Network addresses ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ User names ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Pathnames ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°° °°º º°° °°º NetMail: C:\NETMAIL º°° °°º Messagebase: D:\FE\ º°° °°º Inbound: D:\FE\INBOUND º°° °°º Unprot. Inbound: D:\FE\INBOUND º°° °°º Temp. Inbound: D:\FE\INBOUND\TEMP º°° °°º Local Inbound: D:\FE\INBOUND\LOCAL º°° °°º Outbound: D:\FE\OUTBOUND º°° °°º Temp. Outbound: D:\FE\OUTBOUND\TEMP º°° °°º Semaphores: D:\FE º°° °°º BBS Config: º°° °°º Static queue: º°° °°º Swapping: º°° °°º Rules: º°° °°º º°° °°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°° °°°°°°°°°°°°°°°°°°°°°°°°°° Running under Windows 4.10 °°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Press to save or to abort editing... this is a simple setup i use with fido2int, the blank lines are meant to be blank, and "c:\netmail" is kind of an unusual directory for netmail, C/D:\fe\netmail is more typical... if you're using a frontend mailer like frontdoor or intermail these might be directories you already setup for them for instance your netmail directory might be "C:\fd\netmail"... now go back to your "system" and go to "filenames" here's a shot of mine... FESetup System Data Export Import F1 Help °°°°°°°°°°°°°ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Network addresses ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ User names ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Miscellaneous ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Pathnames ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Filenames ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Parameters ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°³ Advanced options ³°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Filenames ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°° °°°°º º°°°° °°°°º Log file: D:\FE\FE.LOG º°°°° °°°°º AreaFix Log: D:\FE\AF.LOG º°°°° °°°°º Statistics: D:\FE\FESTATS.LOG º°°°° °°°°º º°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°° °°°°°°°°°°°°°ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°° Running under Windows 4.10 °°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Press to save or to abort editing... these are not terribly important, so long as they are there, the only one you need to worry about is the main log file which will a big help if you have problems later on... now let's go ahead and jump all the way back to the main menu, and then in to "data" and then "node configuration" you want to insert a new node, which will be the information for our hub... FESetup System Data Export Import F1 Help °°°°°°°°°°°°°°°°°°°°°°ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°ÉÍÍ 1/1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Node manager ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º Addresses º°°°°° °°°°º Main: 911:1423/0 4D/Type 2+: Y º°°°°° °°°°º ARCmail: 911:1423/0 TosScan: N º°°°°° °°°°º ARCmail 0.60: N º°°°°° °°°°º Name: jack phlash Pack priority: 0 º°°°°° °°°°º Convert Umlaut: N º°°°°° °°°°º Your AKA: 911:911/0 º°°°°° °°°°º Allow Area-Create: N º°°°°° °°°°º Passwords New Area Default Group: A º°°°°° °°°°º Packet: Export By Name: N º°°°°° °°°°º AreaFix: º °°°° °°°°º Status AreaFix flags: ¯ º°°°°° °°°°º ARCmail: None º°°°°° °°°°º AreaFix: None Send Notify: Y º°°°°° °°°°º Packer: PKZIP Max. size: 65534 Send Help: Y º°°°°° °°°°º º°°°°° °°°°º Groups: Passive: N º°°°°° °°°°º Security: 0 Automatic Passive: 0 º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Enter-Edit Ins-Add Del-Delete F2-Routing F3-Browse F4-Area List F5-Copy main and arcmail should be the address of the hub, name should be my name "jack phlash" and your aka should match your zeronet address. don't be concerned with passwords, the only one you'll ever needs is for areafix and that will be available upon request. make sure you set the packer to pkzip and groups to whichever group you make zeronet (will get to that next) we are not concerned with security, make it zero unless you use it with another network, then set it appropriately. next go to "data" and "group area defaults" to setup the zeronet group. FESetup System Data Export Import F1 Help ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Area defaults for Group A ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Comment: zeronet º º Origin: º º Type: EchoMail º º Storage: Fido/*.MSG Board: º º Path: C:\NETMAIL\ZERO º º Use Aka: 911:911/0 º º º º Mandatory: N Keep SEEN-BY: N Tiny SEEN-BY: N CPD: N º º Convert Umlaut: N Keep users: N Kill read: N Disable Passive: N º º Remote changes: Y Hide area: N Keep NetMail: N º º º º Purging # Msgs: 0 # Days: 0 # Rcvd Days: 0 º º Security Read: 0 Write: 0 º º º º Seen-by: 911:911/0 º º Export to: º º º º º º º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° Press to save or to abort editing... you probably need to put your mail in a seperate directory for each area if you're using *.MSG format, so you want to put the subdirectory to make it easier... think as the group as a template for your areas... type is echomail, storage depends on your system, but generally will be fido/msgs, jam, or squish. path should be the directory the messages are stored in. use aka and seen by should be your address, export to should be the node you setup for us in the previous step. ok, now for the final, and fairly exhausting step of setting up the areas for the network. go to the "data" menu and go to "Area Manager"... now go get yourself some caffine or smelling salts or something so you can stay awake... ok? ok... insert an are for each area in the zeronet node list, type in the name of the area and what group it is in, it will ask you if you want to load the defaults for the group, choose yes. now all we need to do is to specify area specific settings... here's an example for setting up 0N-TEST on a *.MSG system... the only things you should need to alter usually are the area name and base names for each area. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit Area ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Name: 0N-TEST Group: A º º Comment: zeronet º º Origin: º º Type: EchoMail º º Storage: Fido/*.MSG Board: º º Path: C:\NETMAIL\ZERO\0N-TEST\ º º Use AKA: 911:911/0 º º º º Mandatory: N Keep SEEN-BY: N Tiny SEEN-BY: N CPD: N Passive: N º º Convert Umlaut: N Keep users: N Kill read: N Disable Passive: N º º Remote changes: Y Hide area: N Keep NetMail: N º º º º Purging # Msgs: 0 # Days: 0 # Rcvd Days: 0 º º Security Read: 0 Write: 0 º º º º Seen-by: 911:911/0 º º Export to: º º º º º º º º º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ ºPress F10 to save or ESC to abort editing... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ simple enough eh? here's one for setting up 0N-TEST on a JAM system... the name and the file name should be the only things you need to alter. remember, you're specifying the filename, as opposed to in the .msg setup where you're specifying the directory the files will be stored. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit Area ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Name: 0N-TEST Group: A º º Comment: zeronet º º Origin: º º Type: EchoMail º º Storage: JAM Board: º º Path: C:\NETMAIL\ZERO\0N-TEST º º Use AKA: 911:911/0 º º º º Mandatory: N Keep SEEN-BY: N Tiny SEEN-BY: N CPD: N Passive: N º º Convert Umlaut: N Keep users: N Kill read: N Disable Passive: N º º Remote changes: Y Hide area: N Keep NetMail: N º º º º Purging # Msgs: 0 # Days: 0 # Rcvd Days: 0 º º Security Read: 0 Write: 0 º º º º Seen-by: 911:911/0 º º Export to: º º º º º º º º º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ ºPress F10 to save or ESC to abort editing... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ IMPORTANT - you also need to make an area of type "badmail" and of type "dupeboard" it doesn't matter what the name is or where the files are stored, as long as they exist... cool? ok, now add the rest... any spelling mistakes will make everything screw up, so pay attention when typing them in... ok, that's it for your mail tosser... not at all hard, ignore anything we didn't cover here unless you're using an advanced setup for some reason, oh yeah, if your bbs add tag lines your will want to specify them in gecho, many of the settings we didn't play with are simply preferences, and can adjust yourself... --------- --- -- - >> section 2: setting up your front end mailer (irex/fido2int) --------- --- -- - - preface a front end mailer is a program that acts as a front end for your bbs, usually... it intercepts any calls to your system that are here to export and import mail before loading your bbs and calls out to other bbses to export and import mail... so, bascially, it MAILS your mail... easy eh? ok, you'll notice this section is specific to setting up fido2int and internetrex, which are not a true frontend mailer... the difference is, it doesn't act as a front end, your pop email account accepts incoming mail, and your smtp server and the other host's copy of f2i does the other part... - preface to setting up irex: why use irex? well, first of all it is much more stable than f2i, which seems to crash quite a lot when automated. second of all it is still being support and new versions are still being released. third, although it does cost money and no crack/warez versions are openly available, a free demo version is available that lets users have up to 3 nodes which means 3 different networks that you can run. this should be enough for most people. next it is available for tons of platforms including win95/98/nt, dos, os/2 and even linux. last, irex has many many more features than fido2int, you name it, it does it including everything f2i does. why not? irex can be much harder to setup, and it is slightly crippled, that's all i can think of ;) zeronet was based around fido2internet style transport which is why only irex and f2i are covered here. a few of our future hubs/nodes may have dial in capability, so if you need help setting up a conventional frontend mailer you might want to contact them. - setting up internetrex v2.01 internetrex has tons of options, but only a few basic ones needs to be entered to use zeronet. this is harder to setup than f2i, but probably eaiser than a tosser and definitly easier than a traditional frontend mailer. download and install irex (i put mine in D:\irex) and run rexcfg.exe (or whatever the file name is for your specific build) welcome to the main menu... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º General information º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Rex's behaviour º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Files, paths & programs º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Address manager º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Connecting to the net º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Email setup º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Gateway setup º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º FTP setup º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Connection defaults º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Node manager º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Server config º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Event manager º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Queue editor º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Logging options º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° next go to general information... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°ÉÍ[þ]µ General information ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°° °°°°°°°°°º Sysop name your name º°°°°°°°°°° °°°°°°°°°º System name º°°°°°°°°°° °°°°°°°°°º System location º°°°°°°°°°° °°°°°°°°°º System flags º°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°° °°°°°°°°°º Password password ********** º°°°°°°°°°° °°°°°°°°°º User level Beginner º°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°° °°°°°°°°°º Registration string º°°°°°°°°°° °°°°°°°°°º Registration key º°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°° °°°°°°°°°º This copy of Internet Rex is unregistered (3 nodes) º°°°°°°°°°° °°°°°°°°°º Server functions are limited to 2 users. º°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°° °°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° sysop name should be set to your sysop name (just as in your tosser) the rest are preferences. next go to files, paths, and programs... then internet rex files and paths. set the directories to something appropriate, you only need the first 5 though you can fill out the rest if you know what you're doing... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Internet Rex files and paths ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Log filename C:\irex\irex.log º°°°°° °°°°º Temp. files directory C:\irex\temp\ º°°°°° °°°°º Queue directory C:\irex\queue\ º°°°°° °°°°º Holding directory C:\irex\hold\ º°°°°° °°°°º Semaphore directory C:\irex\ º°°°°° °°°°º º°°°°° °°°°º Inbound history file º°°°°° °°°°º Outbound history file º°°°°° °°°°º History file format .HIS style º°°°°° °°°°º Lines of history to keep 0 º°°°°° °°°°º º°°°°° °°°°º Received mail semaphore º°°°°° °°°°º TransX mail semaphore º°°°°° °°°°º Run BETWEEN.BAT/.CMD No º°°°°° °°°°º Always run BETWEEN.BAT º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° next go to frontend mailer setup from the files, paths and programs menu... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°°°°°°°°°°°° °°°°ÉÍ[þ]µ Front end mailer setup ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Mailer type FrontDoor (up to 2.20) and compatible º°°°°° °°°°º Netmail directory c:\netmail\ º°°°°° °°°°º Save inbound mail in .MSGs º°°°°° °°°°º Nodelist directory º°°°°° °°°°º Inbound directory d:\gecho\inbound\ º°°°°° °°°°º Secure inbound d:\gecho\inbound\ º°°°°° °°°°º Semaphore directory º°°°°° °°°°º Semaphores º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Logging options º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° set your netmail dir to the same one you're using in your tosser and/or frontend mailer. save inbound mail should be set to messages, set the inbound dirs to how they are set in your tosser and/or frontend mailer. semaphores aren't typically important depending on how you run your bbs and how you're using irex... see rex.doc for more info. next go back to the main menu and go to address manager and address manager again... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º Main address 911:911/0.0 º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º System AKAs º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Connection defaults º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Node manager º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Server config º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Event manager º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Queue editor º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Logging options º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° set the main address to your zeronet address unless you are using more than one network in irex, in which case you can set it to one of the akas. next back to the main menu and to email setup... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Email address configuration ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Address ID username º°°°°° °°°°º º°°°°° °°°°º User name username º°°°°° °°°°º Domain name myisp.net º°°°°° °°°°º º°°°°° °°°°º Mail spool type Connect to SMTP/POP3 host º°°°°° °°°°º Configure º°°°°° °°°°º º°°°°° °°°°º Domain controlled here No º°°°°° °°°°º Multiuser address No º°°°°° °°°°º º°°°°° °°°°º Messages downloaded Matching messages only º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° insert a new address. address id can be whatever you want, but if you have more than one address defined (for multiple networks and such) make it unique... username is your username or prefix of your email address (duh) and domain name is the domain name or suffix of your email address. mail type should be set to connec to smtp/pop3 host unless you'd rather do it another way... messages downloaded should be on matching messages only unless you want tons of errors and weird email showing up when you download your email. next go to configure under mail spool type.... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÉÍ[þ]µ SMTP/POP3 setup ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]º ºÍÍÍÍ»°°°°° °°°°º º SMTP host smtp.myisp.net º º°°°°° °°°°º Addº POP3 host pop3.myisp.net º º°°°°° °°°°º º POP3 username username º º°°°°° °°°°º Useº POP3 password ******************** º º°°°°° °°°°º Domº Use APOP No º º°°°°° °°°°º º Refetch mail No º º°°°°° °°°°º Maiº POP3 timelimit No º º°°°°° °°°°º Cº º º°°°°° °°°°º º º º°°°°° °°°°º DomÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ º°°°°° °°°°º Multiuser address No º°°°°° °°°°º º°°°°° °°°°º Messages downloaded Matching messages only º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° fill in your smtp and pop3 servers. your pop3 user id and your pop3 password, this should be all you need. next go to your node manager and insert a new node... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°ÉÍ[þÉÍ[þ]µ Node information ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÍÍÍ»°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º System addresses 911:1423/0.0 º º°°°°°°°°°°° °°°°°°°°°°º º Sysop's name jack phlash º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º Node active Yes º º°°°°°°°°°°° °°°°°°°°°°º º Outbound messages Toss to mail º º°°°°°°°°°°° °°°°°°°°°°º º Configure º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º Inbound messages Toss from mail º º°°°°°°°°°°° °°°°°°°°°°º º Configure º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º File bundling º º°°°°°°°°°°° °°°°°°°°°°ÈÍÍͺ Connection information ºÍÍͼ°°°°°°°°°°° °°°°°°°°°°°°°°º Node's statistics º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° add my address "911:1423/0" and my name "jack phlash" node active should be on yes unless you have a good reason to shut me off. outbound and inbound messages should be on toss to/from mail. go to configure on toss to mail... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Toss to an email address ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Send mail via username º°°°°° °°°°º Transport method MIME / none º°°°°° °°°°º Encoding method Base 64 encoded º°°°°° °°°°º Email address distortion@wireco.net º°°°°° °°°°º Subject º°°°°° °°°°º Message length 0 lines º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°º º Inbound messages Don't toss inbound º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º File bundling º º°°°°°°°°°°° °°°°°°°°°°ÈÍÍͺ Connection information ºÍÍͼ°°°°°°°°°°° °°°°°°°°°°°°°°º Node's statistics º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° on send mail via select the email account id you added eariler for zeronet. transport method should be on mime/none and encoding should be on base 64. this is the method fido2int uses, so we're going with that for maximum compatability... next go back, and go to configured under toss from mail... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (DOS 16-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Toss from incoming email ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Download via username º°°°°° °°°°º º°°°°° °°°°º Configure matching information º°°°°° °°°°º From: contains distortion@wireco.net º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º Post to netmail Do not post email to netmail º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º Strip headers Yes º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°º º File bundling º º°°°°°°°°°°° °°°°°°°°°°ÈÍÍͺ Connection information ºÍÍͼ°°°°°°°°°°° °°°°°°°°°°°°°°º Node's statistics º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° on download via select the email account id you added eariler for zeronet. the rest can be default, but unless you want email sent to your address (probably mostly spam) to arrive in your netmail directory you should set post to netmail on do not post email to netmail. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (Win95/WinNT 32-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°ÉÍ[þÉÍ[þ]µ Node information ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÍÍÍ»°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º System addresses 911:1423/0.0 º º°°°°°°°°°°° °°°°°°°°°°º º Sysop's name jack phlash º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º Node active Yes º º°°°°°°°°°°° °°°°°°°°°°º º Outbound messages Toss to an FTP site º º°°°°°°°°°°° °°°°°°°°°°º º Configure º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º Inbound messages Toss from an FTP site º º°°°°°°°°°°° °°°°°°°°°°º º Configure º º°°°°°°°°°°° °°°°°°°°°°º º º º°°°°°°°°°°° °°°°°°°°°°º º File bundling º º°°°°°°°°°°° °°°°°°°°°°ÈÍÍͺ Connection information ºÍÍͼ°°°°°°°°°°° °°°°°°°°°°°°°°º Node's statistics º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° here's what a sample toss to an ftp site/configure might looks like: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (Win95/WinNT 32-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Toss to an FTP site ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Site name ftp.demonic.net º°°°°° °°°°º User name º°°°°° °°°°º Password ******************** º°°°°° °°°°º Site's hours 0:00-24:00 º°°°°° °°°°º Lock file size 1 byte º°°°°° °°°°º Unique storage No º°°°°° °°°°º Filename case Don't care º°°°°° °°°°º Script type Automatic (constructed by Rex) º°°°°° °°°°º Dest. directory /9119110/outgoing º°°°°° °°°°º Directory locking Do not use directory locking º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° site name is "ftp.demonic.net" user name and password must be obtained from me, see the contact info at the end of this document if you don't already have them. the destination directory should be defined by our ftp servers directory structure: \nodenumberwithnospecialcharacters (ie: 911:1423/0 = \91114230) \incoming - mail incoming to node \outgoing - mail outgoing from node so if your node were "911:911/0" the directory would be "9119110" and you'd want to toss TO the outgoing directory. all other options can remain default... here's the toss from/configure screen.. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (Win95/WinNT 32-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°ÉÍ[þ]µ Toss from an FTP site ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»°°°°° °°°°º º°°°°° °°°°º Site name ftp.demonic.net º°°°°° °°°°º User name º°°°°° °°°°º Password ******************** º°°°°° °°°°º Site's hours 0:00-24:00 º°°°°° °°°°º Lock file size 1 byte º°°°°° °°°°º Auto-delete Yes º°°°°° °°°°º Script type Automatic (constructed by Rex) º°°°°° °°°°º Source directory /9119110/incoming º°°°°° °°°°º Directory locking Do not use directory locking º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°º º°°°°° °°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°° °°°°°°°°°°°°°°º º°°°°°°°°°°°°°°° °°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° once again site name is "ftp.demonic.net" user name and password must be obtained from me, see the contact info at the end of this document if you don't already have them. the destination directory should be defined by our ftp servers directory structure: \nodenumberwithnospecialcharacters (ie: 911:1423/0 = \91114230) \incoming - mail incoming to node \outgoing - mail outgoing from node so if your node were "911:911/0" the directory would be "9119110" and you'd want to toss FROM the incoming directory. autodelete should be turned on so you don't redownload the mail over and over again, unless of course you have a good reason to want to keep it all, after all your tosser should take care of the dupes. all other options can remain default... keep in mind that you can mix these options up, say for instance you get mail via pop but have to send via ftp because you have no local ftp server available to you (or maybe you use more than one isp, your smtp server only lets local ips send and you never know which isp you'll be on when the event runs...) - that should be it. any spelling mistakes will make everything screw up, so pay attention when typing them in... ok, that's it for your internetrex... not at all hard, ignore anything we didn't cover here unless you're using an advanced setup for some reason, oh yeah, if your bbs add tag lines your will want to specify them in gecho, many of the settings we didn't play with are simply preferences, and can adjust yourself... - preface to setting up f2i: why use f2i? well, first of all it is MUCH easier to setup, and much easier to use than a conventional front end mailer and even irex, plus it just seems to work out a lot smoother than a traditional front end... of course you need a internet account and a spare pop server... why not? people hate f2i... it's shareware, which is an easy problem to solve in most cases, and it doesn't work very well... it comes with sparce documentation and doesn't always work, especially when automated. it is no longer supported, is only available for win95/98/nt and simply lacks a lot of features that some networks may need... some people prefer to use internetrex, which is still in development and, although more complicated to setup, does bascially the same thing... it's available for more platforms, and best of all, internet rex CAN be setup for use with f2i format, and is an acceptible alternative if you do not wish to use fido2int. the main hub itself has switched to internet rex because of it's better stability, features, and support... WE URGE YOU TO TRY INTERNETREX FIRST! - setting up fido2internet v2.00 fido2 internet is fairly easy to setup, here's how... download it, install it, (i put mine in D:\f2i) and edit the fido2int.ini file... there's a few other things you can do also, but this should set it up completely by itself, oh... might wanna back up your old ones, in addition to being the setup file, it's also the docs... (eek) here's a sample fido2int.ini file... - begin fido2int.ini [Receiving] ; your pop (incoming) mail server POPserver=pop3.myisp.net ; your pop (incoming) mail server username POPusername=mybbs ; your pop (incoming) mail server password POPpassword=password ; your gecho/frontend mailer inbound directory Inbound=D:\GECHO\INBOUND\ SaveEmail=D:\F2I\SAVE\ [Sending] ; your smtp (outgoing) mail server Host=smtp.myisp.net ; your reply address FromEmail=me@myisp.net ; your bbs name = your bbs name, duh From=your bbs name (FIDO2INT) ; this gets replaced by f2i, so don't mess with it... ;) Subject=FIDO2INT -> $FILENAME$ ($FILESIZE$ bytes) [Outgoing] DisableCheck OurZone=911 ; your gecho/frontend mailer netmail directory Netmail=D:\NETMAIL\ [Other] NetTimeOut=90 LogSize=64 [Redirect] SendPkt Redirect 911:1423/0 distortion@wireco.net - end fido2int.ini you can steal that, edit it to suit your needs and use it, but i suggest reading through the default fido2int.ini file because it may answer some of your questions on a few other things... IMPORTANT - add "Xmailer Internet Rex 2.01" to your fido2int.flt below the already existing entry for f2i, this will allow you to recieve messages sent by internet rex and is REQUIRED to poll with zeronet. --------- --- -- - >> section 3: setting up your bbs software --------- --- -- - - preface: the bbs is usually the easy part of the setup process, hopefully... i've provided a few different exmaples here, most of them should apply to pretty much any bbs soft in a generic sense... there are, however, a few bbs softwares which handle echomail really strangly and/or complexly... hmph. oh, and you should already know how to use your bbs software, so there won't be any specifics for getting around in them... note i've only provided bbs software commonly used by the underground scene, and ones that are still in use... i've simply referenced other help guides for some of them... remember, jam systems will require just the directory the jam files are in which is probably the same for all of your bases. a *.msg system will need the specific directory for each message base. both will use the file name to find the actual names of the files in the directory you specify. - setting up mystic (uses JAM format) from your wfc screen hit "s" to go to the system config, then go to "f" (network config) and set your network address and origin line... Network Settings 1. 911:XXXX/X 2. 0:0/0 3. 0:0/0 4. 0:0/0 5. 0:0/0 6. 0:0/0 7. 0:0/0 8. 0:0/0 9. 0:0/0 10. 0:0/0 11. 0:0/0 12. 0:0/0 13. 0:0/0 14. 0:0/0 15. 0:0/0 16. 0:0/0 17. 0:0/0 18. 0:0/0 19. 0:0/0 20. 0:0/0 A. Origin : your bbs name and any other info you want to put B. Netmail Crash : No C. Netmail Hold : No D. Netmail Kill : No Command (Q/Quit): now get out of your system config, back to your wfc and hit "m" for the message base editor... you need to specify the name, which is how it's displayed when you're online, the file name, which when using jam is the file name you specifed in gecho without the directory, and the storage path, which is the file name you specifed in gecho without the file name.. make sure you setup base type to echomail and are using the correct tear line and net address. Message Base 1 of 1 A. Name : zeronet test/setup help B. QWK Name : 0n-test C. Filename : 0N-TEST D. Storage Path : C:\NETMAIL\ZERO\ E. Post Type : Public Y. Base Format : JAM F. List ACS : s10 O. Quote Color : XX> Quote G. Read ACS : s20 P. Text Color : Text H. Post ACS : s50 R. Tear Color : --- Tear I. Sysop ACS : s255 S. Origin Color : * Origin: J. Password : T. Header File : READHEAD K. Base Type : EchoMail L. Net Address : 911:XXXX/X M. Origin line : your bbs name and any other info you want to put N. Use Realnames: No U. Default New Scan: Yes W. Max Messages : 0 V. Default QWK Scan: Yes X. Max Msg Age : 365 days ([) Prev, (]) Next, (Q)uit: that's it, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... oh, you may also wanna go to "e" (message config) to specify your tear and origin line colors. because this bbs uses jam format, if you set your gecho to use jam format than you do not need to use another mail tosser like you do with many other softwares which means when gecho does it's stuff, it's done... that's it. - setting up iniquity (fairly typical, uses *.MSG) from your wfc screen go to the system config, then go to "d" for network address setup... add your network address for zeronet somewhere... ______________________________________________________________________________ \_________ . __________ . __ | ________ __ . ___/ // \ : \ \\ | \ : \ \\ \ : \ jp __/ \ | \ \ : \\ . \ \ \ | \\ \_________/____| //_____/_____ _/__________/______/_______/___ ' / [iniquity2.0] |____/ ========= /__________/ =============== \\____________/ (Network Address Configuration)::::::::::::::::::::::::::::::: a Address #1 911:XXXX/X.0 (k) Address #11 0:0/0.0 (b) Address #2 0:0/0.0 (l) Address #12 0:0/0.0 (c) Address #3 0:0/0.0 (m) Address #13 0:0/0.0 (d) Address #4 0:0/0.0 (n) Address #14 0:0/0.0 (e) Address #5 0:0/0.0 (o) Address #15 0:0/0.0 (f) Address #6 0:0/0.0 (p) Address #16 0:0/0.0 (g) Address #7 0:0/0.0 (q) Address #17 0:0/0.0 (h) Address #8 0:0/0.0 (r) Address #18 0:0/0.0 (i) Address #9 0:0/0.0 (s) Address #19 0:0/0.0 (j) Address #10 0:0/0.0 (t) Address #20 0:0/0.0 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ À: iq config % arrows: move lightbar enter/key: select escape: quit menu :Ù now goto your origin line configuration section from the main menu, it's "m" from the main config menu... ______________________________________________________________________________ \_________ . __________ . __ | ________ __ . ___/ // \ : \ \\ | \ : \ \\ \ : \ jp __/ \ | \ \ : \\ . \ \ \ | \\ \_________/____| //_____/_____ _/__________/______/_______/___ ' / [iniquity2.0] |____/ ========= /__________/ =============== \\____________/ (Origin Line Setup)::::::::::::::::::::::::::::::: a Origin #1 your origin line! (k) Origin #11 (b) Origin #2 (l) Origin #12 (c) Origin #3 (m) Origin #13 (d) Origin #4 (n) Origin #14 (e) Origin #5 (o) Origin #15 (f) Origin #6 (p) Origin #16 (g) Origin #7 (q) Origin #17 (h) Origin #8 (r) Origin #18 (i) Origin #9 (s) Origin #19 (j) Origin #10 (t) Origin #20 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ À: iq config % arrows: move lightbar enter/key: select escape: quit menu :Ù the message config option "o" from the system config menu, has some useful netmail options for later, but for now don't worry about it. goto your message area editor from the wfc screen, you're concerned with the name, file name, paths and type... that's about it... ______________________________________________________________________________ \_________ . __________ . __ | ________ __ . ___/ // \ : \ \\ | \ : \ \\ \ : \ jp __/ \ | \ \ : \\ . \ \ \ | \\ \_________/____| //_____/_____ _/__________/______/_______/___ ' / [iniquity2.0] |____/ ========= /__________/ =============== \\____________/ (Iniquity Message Area Editor)::::::::::::::::::::::::::::::: ::: Current area 1 of 1 a Description zeronet test/setup help (b) Filename 0N-TEST (c) Msg area type EchoMail area (d) Echomail path C:\NETMAIL\ZERO\0N-TEST\ (e) Origin line # 1 (your origin line! ...) (f) Net address #1 (0:0/0.0) (g) Area sponsor SysOp (h) Access ACS s25 (i) Post ACS s50 (1) Unhidden No (j) Max messages 200 (2) Real Names No (k) Password (3) Private Yes (l) QWK name 0n-Test (4) Mandatory No (m) Messages 0 (5) Anonymous Yes ([) Previous Area (]) Next Area ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ À: iq config % arrows: move lightbar enter/key: select escape: quit menu :Ù that's it, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... because this bbs uses *.MSG format you will need to use an external utility included with the bbs software to toss the messages from your tosser in to the bbs... in this software it's included as "iniqmail.exe" ... see section 4 for more info... - setting up renegade (fairly typical, uses *.MSG) from your wfc screen hit "s" to go to the system config, then go to "h" (network config) hit "a" to set your network address and then go back to the network config menu and set your directories and default preferences... Network addresses A. Address #0 : 911:XXXX/X.0 B. Address #1 : 0:0/0.0 C. Address #2 : 0:0/0.0 D. Address #3 : 0:0/0.0 E. Address #4 : 0:0/0.0 F. Address #5 : 0:0/0.0 G. Address #6 : 0:0/0.0 H. Address #7 : 0:0/0.0 I. Address #8 : 0:0/0.0 J. Address #9 : 0:0/0.0 K. Address #10 : 0:0/0.0 L. Address #11 : 0:0/0.0 M. Address #12 : 0:0/0.0 N. Address #13 : 0:0/0.0 O. Address #14 : 0:0/0.0 P. Address #15 : 0:0/0.0 Q. Address #16 : 0:0/0.0 R. Address #17 : 0:0/0.0 S. Address #18 : 0:0/0.0 T. Address #19 : 0:0/0.0 Enter selection (A-T) : Network configuration A. Net addresses B. Origin line : your origin line here, bub... C. Strip IFNA kludge lines : No 1. Color of standard text : 7 D. Strip SEEN-BY lines : No 2. Color of quoted text : 15 E. Strip origin lines : No 3. Color of tear line : 8 F. Add tear/origin line : Yep 4. Color of origin line : 15 G. Default Echomail path : C:\NETMAIL\ H. Netmail path : C:\NETMAIL\ I. Netmail attributes : Local Private KillSent J. UUCP gate address : 0:0/0.0 Enter selection (A-J,1-4) [Q]uit : now get back to your wfc and hit "b" to edito your message bases, you need to worry about your name, filename, path, type and preferences... Message base #1 of 2 1. Name : zeronet test/setup help 2. Filename : 0N-TEST 3. Base type : EchoMail Message path: C:\NETMAIL\ZERO\0N-TEST\ 4. ACS req. : s25 5. Post/MCI ACS: 25 / 50 6. Sysop ACS : s255 7. Max Mess : 100 8. Anonymous : No 9. Password : N. Net Address : 0:0/0 C. Colors : Text=7, Quote=15, Tear=8, Origin=15 M. Mail flags : ---/-- O. Origin line : your origin line here, baby! T. Toggles : ----- P. QWK Index : 1 Q. Quit Edit menu (?=help) : that's it, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... because this bbs uses *.MSG format you will need to use an external utility usually included with the bbs software to toss the messages from your tosser in to the bbs... in this software it's included as "renemail.exe" see section 4 for more info... - setting up with pcboard (complex, not typical at all) hey, setting up pcboard is a bitch... goto section 6 for some detailed documents on how to set it up... please? - setting up infusion (uses *.MSG) from your wfc screen go to the system config, then go to the file/message network setup... edit your network address, origin line and name for zeronet. Ú:: file/mail network info ::ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ a Default Net Origin : your Board Name Here (b) Default Net Address : 911:XXXX/X.0 (c) Default Net Name : tHE zERO nETWORK ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ À:: arrow keys navigate, X exits, hot keys jump to editing field ::ÄÄÄÄÄÄÄÄÄÄÄÄÙ now add a new area, for those ignorant infusion sysops out there, this is done by attempting to switch to an area the doesn't exist... ܱ° ßßßßßßßßßßßßßßßßßßß ßßß ß °±Ü Û Creating Area Number: 1... ßÜÜÜÜÜ° ÜÜÜ ÜÜ Ü ±² ÜÜÜ Ü ° °±ß Sub-Board Name: zeronet test/setup help Area Flags? [A-Z / "-" + Letter = NOT]: Sponsor [sysop]: sysop Minimum level to view messages [0]: 0 Minimum level to post messages [0]: 0 Post Flag(s) [A-Z / "-" + Letter = NOT]: Autodelete after [100]: 100 Is this a Echomail Sub? [ Yup ] Nope Net Name (Cr/tHE zERO nETWORK) : Net Node Address (Cr/911:XXXX/X.0): Origin Line? (CR/Default) : [ Import/Export Directory - CR=D:\INFUSION\BOARDS\2\ ]: D:\NETMAIL\ZERO\0N-TEST\ Path doesn't exist! Create it? [ Yup ] Nope Directory created etc etc etc, here's what it looks like when you edit it! [Sub Board Editing...] Change Which? [ ] [a] Board Number....: 1 [b] Board Name......: zeronet test/setup help [c] Area Flag(s)....: [d] Area Sponsor....: sysop [e] Area Level......: 0 [f] Post Level......: 0 [g] Post Flags......: [h] Auto-Delete.....: 100 [i] NET Type........: Echomail [j] Real Names......: Nope [k] Fido-Address....: 911:XXXX/X.0 [l] Fido-Directory..: C:\netmail\zero\0n-test\ [m] Fido-OriginLine.: your bbs name here [n] Net Name........: tHE zERO nETWORK [o] Private Netmail.:  Nope that's it, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... because this bbs uses *.MSG format you will need to use an external utility included with the bbs software to toss the messages from your tosser in to the bbs... in this software it's included as "infutoss.exe" see section 4 for more info... - setting up oblivion/2 (uses *.MSG) from your wfc screen go to the system config, then go to the file/message network setup... edit your network address, origin line and name for zeronet. ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ Command : (Q)uit Oblivion/2 Base Editor ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ (A) Base Name : zeronet test/setup help ³ ³ (B) Access ACS : s20 ³ ³ (C) Post ACS : s50 ³ ³ (D) Allow Anonymous: No ³ ³ (E) Sponsor : Sysop ³ ³ (F) Origin Line : your origin line here ³ ³ (G) EchoMail Dir : C:\netmail\zero\0n-test\ ³ ³ (H) NetMail : No ³ ³ (I) Node : ³ ³ (J) QWKName : ³ ³ (K) Autodelete : 200 ³ ³ (L) Real Names : No ³ ³ (M) Base File Name : 0n-test ³ ³ (N) Mandatory : No ³ ³ (O) Allow Private : No ³ ³ [,] Previous/Next Base ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; that's it, believe it or not, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... because this bbs uses *.MSG format you will need to use an external utility included with the bbs software to toss the messages from your tosser in to the bbs... in this software it's included as "obvmail.exe" see section 4 for more info... - setting up telegard (flexible, but not hard... uses JAM) from your wfc screen hit "s" to go to the system config, then go to "m" (network config) and set your network address and origin line, the rest are just prefences that you don't need to worry about for now... Message System Configuration A. Define system addresses B. Default area configuration C. User access configuration D. Netmail status Kill J. Upload messages Enabled E. Hold all netmail Yes K. Userlist lookup Disabled F. UUCP email gate Disabled L. Nodelist lookup Disabled G. Antiquated UUCP No M. SmartQuote Enabled H. Honour RRQ Yes N. QuickQuote Disabled I. Space to post 100K O. Confirm FSE Save Enabled P. FSE command "" R. FSE non-abort Internal S. FSE doortype None T. Nodelist Invalid, "" U. Write logging Disabled Enter selection or (Q)uit : hit "a" and edit your address, we'll do the rest in the message base editor later... Message System Configuration - Network Addresses ## Address MatchAKA NetArea ## Address MatchAKA NetArea -- ----------------- -------- -------- -- ----------------- -------- -------- 1 911:XXXX/X 11 0:0/0 2 0:0/0 12 0:0/0 3 0:0/0 13 0:0/0 4 0:0/0 14 0:0/0 5 0:0/0 15 0:0/0 6 0:0/0 16 0:0/0 7 0:0/0 17 0:0/0 8 0:0/0 18 0:0/0 9 0:0/0 19 0:0/0 10 0:0/0 20 0:0/0 Network address configuration (?=Help) : ok, go back to your message menu, then your main menu, then goto your manager by hitting "*" then go to your message area editor "m" and edit the desc, name, path, type, and preferences... Message Area Manager - Editing #1 of 1 A. Description zeronet test/setup help B. Filename 0N-TEST C. Storage path "C:\netmail\zero\" D. Area format JAM !. Date Sat 04 Sep 1999 11:18p E. Area type Echomail QWK-Index 1 F. Reading ACS "^" G. Posting ACS "^" H. SysOp ACS "s255xL" I. Network ACS "%" K. Colours Text(7) Kludge(12) Quote(10) Tear(1) Origin(9) L. Origin line "" M. Mail address 0:0/0 R. Scan type Default ON N. Mail flags R----/8ACST S. Info filename N/A O. Posting type Public T. Limits - Max# Unlimited messages P. Anonymous No U. Limits - Age Unlimited days Edit menu (?=Help) : that's it, believe it or not, do that for all the zeronet areas and you're done, read section 4 for more info on setting up your batch files... because this bbs uses jam format, if you set your gecho to use jam format than you do not need to use another mail tosser like you do with many other softwares which means when gecho does it's stuff, it's done... that's it. mail me if you need help setting up any specific bbs software, or for suggestions on things to add to this section... --------- --- -- - >> section 4: getting it all fine tuned with batch files.... --------- --- -- - - preface: in order to complete the setup of your echomail system you need to setup a series of batch files to help automate the process of tossing mail in and out of your bbs and/or your mailer. in section 5 I include steps in to setting up batch files and automation with fido2int... it should be noted that setting up a traditional frontend mailer is quite different, though it does include these steps, it is much more complicate and extensive, see section 6 for more info on... - *.msg systems - tossing mail in to your bbs (with renegade as an example) you idealing want to toss mail in to your bbs after your bbs polls for new mail, whether this is after you dial up to your hub using frontdoor or intermail, or after you run fido2internet or internet rex. to get gecho to toss inbound mail all you have to do is run "gecho toss"... however, since renegade can't directly *.MSG files, it has to convert it into it's own format by running "renemail -t" which tosses inbound mail into renegade, simple... it's good to run "renemail -p" to purge all the old messages that gecho leaves behind afterwards. all other bbs softwares that use *.MSG echomail networking are bascially the same... they should include a tosser program of their own with a purge, toss and scan function, and maybe some others... here's a sample "inmail.bat" file that would be run or automatically by your traditional frontend mailer after polling for new mail. - begin inmail.bat @echo off d: cd\gecho gecho toss cd\renegade renemail -t renemail -p - end inmail.bat - tossing mail out of your bbs (with renegade as an example) most bbs softwares include a specific or specifible error level to let the batch file the runs the program know that there is outgoing echomail message that need to be tossed out... as an example i am using renegade bbs, which doesn't automatically exit with an error level reflecting mail status (as far as i know, i havn't ran it in years...) however, a seperate program, mailscan, will return an error level of "3" if new mail is to be sent. this is the batch file that runs the bbs, as you can see when error 3 is reached batch file runs "renemail -s" which scans in all new outgoing echomail from renegade, then runs "gecho scan" which scans the new mail out to the mailer for delivery. - begin runbbs.bat :start d: cd\renegade renegade.exe %1 %2 %3 %4 %5 mailscan if errorlevel 255 goto quit if errorlevel 2 goto outmail goto start :outmail d: cd\renegade renemail -s cd\gecho gecho scan cd\renegade renemail -p goto start :quit - end runbbs.bat - jam systems - tossing mail in to your bbs (with mystic as an example) you idealing want to toss mail in to your bbs after your bbs polls for new mail, whether this is after you dial up to your hub using frontdoor or intermail, or after you run fido2internet or internet rex. with a jam message base system like mystic or telegard, all you have to do is run some kind of simple batch file that calls "gecho toss" which tosses all inbound echomail into your bbs software. because of how simple this is right now, i won't bother giving you a batch file for it until we get to the next section. - tossing mail out of your bbs (with mystic as an example) most bbs softwares include a specific or specifible error level to let the batch file the runs the program know that there is outgoing echomail message that need to be tossed out... as an example i am using mystic bbs, which exits with an error level of "3" for example... this is the batch file that runs the bbs, as you can see when error 5 is reached batch file runs "gecho scan" which scans in all new outgoing echomail. - begin runbbs.bat :start d: cd D:\MYSTIC\ mystic.exe %1 %2 %3 %4 %5 if errorlevel 255 goto quit if errorlevel 69 goto domail if errorlevel 5 goto outmail if errorlevel 1 goto quit goto start :domail exit :outmail D: cd\gecho gecho scan goto start :quit - end runbbs.bat --------- --- -- - >> section 5: getting it all automated! --------- --- -- - - general info what you gotta do if you're running a telnet board is simply setup your bbs to run an event at a certain time (or times) a day, in that event run a batch file that tosses out going mail, then runs your mailer to send and recieve new mail, then scan in any incoming mail... reload the bbs. it's that simple. on a dial up system you'd have to actually close the dos window and/or unload your fossil driver during the event, then connect to the internet, then run the program, then disconnect from the internet, then open the bbs back up... this can be a bit more of a challenge... you can use 3rd party programs to run events like connecting to the net, you can run programs that do all of this at once (irex) or you can use windows scheduler to run events like this... - specific example with fido2int preface: this is a modified version of the same batch files used in section 4 for mystic, and can easily be changed to work with the renegade, or any other batch files for that matter... read the comments for explanations... there are many other ways to automate your internet mailer, the fido2int has it's own suggestions on how to automate, also internetrex, transx, and other mailers usually have some semi-built in way to automate themselfs, check their docs... note that i don't mention automating your traditional frontend mailer, why? because if you set them up correctly in the first place they should already be automated, that's what they're for... - begin runbbs.bat - this file executes the bbs and takes care of events and outgoing mail... @echo off rem same as the runbbs included in mystic except for error levels 69 and 5. rem rem error level 5 means someone has written outgoing netmail, so when mystic rem exits with that errorlevel i have it goto my gecho directory, toss the rem mail out, and go back to the start rem rem error 69 is the definable errorlevel that mystic exits with when the rem event time is reached. mine is set to 9:00pm (est) and when it reaches rem that time it exits the dos window. (in win95 this also unloads the fossil rem stuff, which is quite esstential) ... rem rem i have another program, called netlaunch which is a windows util that rem lets you schedule events for connecting/disconnecting to the net and rem openning and closing programs. at 9:01 it connects to the net, and rem executes "domail.bat"... when that is done running it disconnects and rem and starts "runmail.bat" back up. -jp :start d: cd D:\MYSTIC\ mystic.exe %1 %2 %3 %4 %5 if errorlevel 255 goto quit if errorlevel 69 goto domail if errorlevel 5 goto outmail if errorlevel 1 goto quit goto start :domail exit :outmail D: cd\gecho gecho scan goto start :quit - end runbbs.bat - begin domail.bat - this batch file is run from runbbs.bat when the event is executed. :START @ECHO OFF rem this is the file that is executed when netlaunch connects me to the net, rem the labels were here only for flexibility, and arn't actually used yet. rem rem first (under runf2i) it changes to the fido2int directory, and opens rem a new program (the win95 start command) the wait forces it to wait for rem the program to exit before continuing to run the rest of the batch file rem heh. the /auto commands makes it automatically send and recieve mail rem and the shutdown command makes it close when done. handy eh? rem rem next (under process) we switch to the gecho directory, toss all the new rem incoming email, and then execture a program (cci-1) that kills all the rem old crap f2i leaves behind. rem rem then, it exits. simple eh? -jp :RUNF2I D: CD\F2I START /WAIT FIDO2INT.EXE /AUTO /SHUTDOWN :PROCESS D: CD\GECHO GECHO TOSS CD\F2I\KILLER CCI-1 C:\NETMAIL\ :END EXIT - end domail.bat - begin runmail.bat - this file is executed by the netlaunch program after it disconnects from the internet. @echo off rem this batch file simply loads up my fossil driver, sets the ports and rem then changes to the primary directory and starts up node 1 (my dial up rem node) -jp d: cd\mt x00 cd\x00 xu lock:1:57600:8N1 set:1:57600:8n1 PORT:1:ON cd\mystic node1.bat - end runmail.bat - internet rex tips automating internet rex can be like doing it with f2i like the example above, you can run "rex -fs" for newer ones. rex will automatically exit after it has completed. you can also configure rex to connect to the internet for you. for instantance in the 32bit win95/98/nt version you can leave it running as a daemon ("rex -daemon") and setup events in the event manager similar to the way you can set them up in a bbs. between.bat is executed (or any of batch files, depending on how you set up your event) to toss in mail. this works great of telnet systems. you can also make internetrex connect for you using dial up networking or whatever dialer is available. this should eliminate the need for clunky memory consuming programs like netlaunch. if you want a great automated setup irex is the ONLY way to go... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Internet Rex version 2.01 (Win95/WinNT 32-bit) ³ ³ (C) Copyright 1997-2000 Khan Software Press F1 for help ³ ÀÄÄÄÄÄÄÄÄÉÍ[þ]µ Dialup networking ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ °°°°°°°°°º º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Socket timeout 60 seconds º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Data timeout 60 seconds º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Dialup networking Yes º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Auto dial Yes º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Auto hangup Yes º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Redials 0 º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Redial pause 0 seconds º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Inactivity timeout 0 seconds º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Login name º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Password ******************** º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Connection your isp º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º Other connections Use this one only º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°º º°°°°°°°°°°°°°°°°°°°° °°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º Quit program º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°º º°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ°°°°°°°°°°°°°°°°°°°°°°°°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° first, setup your irex to use the appropriate dun connection, set it to autodial and autohang up... now lets modify the batch files we used for automating f2i... - begin runbbs.bat - this file executes the bbs and takes care of events and outgoing mail... @echo off rem same as the runbbs included in mystic except for error levels 69 and 5. rem rem error level 5 means someone has written outgoing netmail, so when mystic rem exits with that errorlevel i have it goto my gecho directory, toss the rem mail out, and go back to the start rem rem error 69 is the definable errorlevel that mystic exits with when the rem event time is reached. mine is set to 9:00pm (est) and when it reaches rem that time it starts another batch file using the windows "start" command rem and exits the dos window. (in win95 this also unloads all the fossil rem stuff, which is quite esstential) ... :start d: cd D:\MYSTIC\ mystic.exe %1 %2 %3 %4 %5 if errorlevel 255 goto quit if errorlevel 69 goto domail if errorlevel 5 goto outmail if errorlevel 1 goto quit goto start :domail start d:\irex\runrex.pif exit :outmail D: cd\gecho gecho scan goto start :quit - end runbbs.bat why is it running a pif you might ask? i made this pif for "runrex.bat" so it would run the batch file interrupted and exit the window after completeing... alternatively you can make a "_default.pif" file and place it in your windows dir, these settings get applied to any program run in dos without a pif... - begin runrex.bat - this batch file is run from runbbs.bat when the event is executed. rem this batch file runs rex in a seperate window (send and recieve) rex will rem automatically send and recieve any mail, connect to the internet to do so rem and disconnect when done. notice i used the "/wait" parameter for the rem windows start command... this makes the batch file pause until the started rem command died (irex exits) then we goto gecho, toss in any mail, start rem lm.bat (or in this case lm.pif, again so i can control more of the windows rem properties) then exits the window... @ECHO OFF d: CD\IREX START /WAIT REXW -FS d: CD\GECHO GECHO TOSS START d:\MYSTIC\LM.PIF EXIT - end runrex.bat - begin lm.bat - this file is executed by the runrex batch file after irex is done getting mail and gecho is done tossing it... @echo off rem this batch file simply loads up my fossil driver, sets the ports and rem then changes to the primary directory and starts up node 1 (my dial up rem node) -jp d: cd\x00 x00 xu lock:1:57600:8N1 set:1:57600:8n1 PORT:1:ON cd\mystic node1.bat - end runmail.bat --------- --- -- - >> section 6: misc general info... --------- --- -- - ---- general stuff you might need to know... jack phlash is now souly in charge of all aspects of the administration of the network, please direct all questions to him... the easiest way to contact him is via email on their bbses or internet email. we suggest you limit posting to zeronet to users you know can handle the responsibility... for instense, on my bbs 20 (normal) sl users can read echomail, but only 50+ can post... the choice is yours, and ultimately you will be responsible for maintaining your systems users. the only mandatory echo on the network is 0n-sysop, which should be restricted only to sysops and co sysops of the node. news will be posted to both areas typically, with more technical detail in sysop area. if you wish to stop getting other areas simply remove them from your tosser or bbs. if you wish to stop getting messages from that area send an areafix request to distortion or contact jp. (see below for information) technical stuff... jack phlash's bbs, distortion, is the main hub for the system. he is responsible for sending out and recieve mail. currently, mail is sent and received every day at 9:00am est and 9:00pm est. yours can obviously be any time. we don't do it more than twice a day yet, but we're planning on setting it up for more times per day... stay tuned to the announcements echo. the main hubs address is distortion@wireco.net the main hubs node is 911:1423/0... jack phlash's name is "jack phlash" obviously ;) there is currently no dial up hub available, however we are looking for someone who wants the job. there is no official netmail area on zeronet, however areafix requests and the like can be posted to "0N-MAIL" - PLEASE contact jp before posting requests for security information before doing so... currently this is the only use of the netmail area. yes, ftping it available, mail jp for details. there is no filebone areas on zeronet. (yet) that, combined with the node list should be enough info to get you started on setting up your own programs. --------- --- -- - >> the end... --------- --- -- - - contacting us primary hq/hub: distortion - 1-423-913-3159 internet email: jp@demonic.net irc (efnet): dcc to phlash (in #zeronet if online) zeronet website: http://www.demonic.net/zeronet -------------------------------------------------------- ---- --- -- - - - >> 0n helpguide v2.1 (9/28/01) - (c) zeronet (except for everything we stole) -------------------------------------------------------- ---- --- -- - - -